地面附近的高空核爆电磁脉冲环境

 主要研究在高空核爆的双指数类型电磁脉冲平面波入射时，地面附近的电磁脉冲环境。计算给出了在不同入射波状态，不同地表介质电气特性和距地面不同高度等条件下的电磁脉冲环境参数，归纳了一些规律性认识。结果显示：地面附近的电场会随距地面高度的不同而发生显著的变化，对于水平场分量，其反射场总是试图抵消入射场，而对于垂直场分量，其反射场叠加在入射场上，使得地面附近的垂直场强幅值一般大于入射波场强幅值；当入射波仰角增大时，合成电场波形的脉冲宽度会变宽；地表介质的电气特性参数不同也会对地面附近电场的波形和幅值造成一定的影响。     

应用无衍射贝塞尔光束的固体线膨胀系数测量系统

测量固体线膨胀系数是工程设计中的一项重要工作。这套非接触固体线膨胀系数测量系统利用激光三角法进行了设计。通过采用线阵CCD作为信号传感器来实现自动化测量。通过采用无衍射贝塞尔光束来提高测量精度和增大测量范围。     

Optical and conductive properties of AlSi-alloy/SiCp composites: application in modelling CO2 laser processing of composites

The optical properties—reflectivity, real part of the refractive index, absorption coefficient as well as the thermal and electrical conductivity of AlSi-alloy/SiC_p composite were measured. The optical parameters and both conductivities decreased with the increase of SiC_p particles volume in AlSi-alloy matrix. This decrease was almost linear for the volume fraction of SiC_p particle up to 10 vol% of the total mass of the composite. For the 15 vol% of SiC_p particles, the departure from linearity is connected with the presence of additional phases in AlSi-alloy/SiC_p composite materials. The measured temperature dependencies of optical reflectivity and electrical conductivity for AlSi-alloy/SiC_p 15 vol% are of metallic character. Modelling of the interaction of the CO₂ laser radiation with AlSi-alloy/SiC_p 15 vol% composite should allow to estimate the initiation time at which the surface composite reaches melting temperature.     

Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

水溶性高聚物聚丙烯酰胺的稀溶液性质(Ⅰ)

本工作利用光散射和粘度方法,使用辐射聚合聚丙烯酰胺(PAAM)的级分样品,研究了在较宽分子量范围(10~4-10~7)内PAAM的特性粘数,分子尺寸及第二维利系数对重均分子量的依赖性.从实验上得到了PAAM在0.2mol/lNaCl水溶液中的均方旋转半径与均方末端距之间的关系及高分子-溶剂相互作用参数.     

非水溶液盐效应的气液色谱研究——非电解质(烃、芳烃、氯代烃、酮)+盐(NaI、NaSCN、KSCN)+碳酸丙烯酯体系

由于碳酸丙烯酯(PC)具有较宽的液相区间(mp:224.0K,bp:514.9K)、较高的介电常数(64.92,298.15K)和较大的偶极矩(4.94D),它是一个在工业和科学研究中有广泛应用的非质子型极性溶剂。已有大量文献就PC溶液中电解质-PC、非电解质-PC和离子-离子间的相互作用情况作了报导。对于非电解质-电解质-PC三元系中溶质-溶剂间的相互作用情况还缺乏了解。本文希望通过测定非电解质溶质在PC的电解质溶液中的无限稀释活度系数γ_1~∞,对非水溶液中的溶质-溶剂作用情况有新的了解。气液色谱法(CLC)是测定无限稀释溶液活度系数的有效方法之一。作者曾利用GLC测定了一些烃、氯代烃、醇、酮在环丁砜电解质溶液中的无限稀释活度系数和盐效应常数.     

Sorption and diffusion of water vapor in polyimide films

Sorption and diffusion of water vapor are investigated gravimetrically for polyimide films. The activity dependence of the solubility and diffusion coefficients, S and D, respectively, is classified under four types: (1) constant S and D type, (2) dual-mode sorption and transport type, (3) dual-mode type followed by a deviation due to a plasticization effect at high vapor activity, and (4) constant S and D type followed by a deviation due to water cluster formation at high activity. For the dual-mode type, the Henry's law component is much larger than the Langmuir component except at low activity, and therefore deviation in behavior from the first type is small. S is larger for polyimides with higher content of polar groups such as carbonyl, carboxyl, and sulfonyl. D is larger for polyimides with a higher fraction of free space, with some exceptions. The polyimide from 3,3′,4,4′-biphenyltetracarboxylic dianhydride and dimethyl-3,7-diaminodibenzothiophene-5, 5-dioxide belongs to the third type and displays both large S and large D. The polyimide from 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 4,4′-oxydianiline belongs to the fourth type, and has the largest D but rather small S because of the hydrophobic C(CF₃)₂ groups. © 1992 John Wiley & Sons, Inc.     

Optimal estimation in random coefficient regression models

In linear regression models with random coefficients, the score function usually involves unknown nuisance parameters in the form of weights. Conditioning with respect to the sufficient statistics for the nuisance parameter, when the parameter of interest is held fixed, eliminates the nuisance parameters and is expected to give reasonably good estimating functions. The present paper adopts this approach to the problem of estimation of average slope in random coefficient regression models. Four sampling situations are discussed. Some asymptotic results are also obtained for a model where neither the regressors nor the random regression coefficients replicate. Simulation studies for normal as well as non-normal models show that the performance of the suggested estimating functions is quite satisfactory.